Waterhog Floor Mat

Waterhog™ Fashion features a fabric border for an attractive look that is easy to maintain. Bi-level construction wipes and scrapes shoes AND traps debris away from foot traffic. The rubber-reinforced fabric-covered nubs hold their shape and won't flatten as you wipe your shoes. Made in the USA!

	Unique ridged construction effectively traps dirt and moisture beneath shoe level.
	Exclusive rubber-reinforced face nubs prevent pile from crushing in high traffic areas, maintaining high performance and extending product life.
	Premium 24-ounce anti-static, 100% polypropylene fiber system dries quickly and won't fade or rot. When wet, the rubber-reinforced surface allows water to be wicked to the bottom of the mat, away from foot traffic and providing a slip-resistant surface.
	Exclusive "water dam" border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage.
	Attractive border makes it the perfect choice for indoor or outdoor applications.
	Green friendly rubber backing has 20% recycled rubber content.
	All Waterhog™ mats are certified slip resistant by the National Floor Safety Institute.
	Anti-static fiber system has a maximum average voltage of 1.6KV as measured by the AATCC. Mats are safe for use in computer rooms and around electronic equipment.
	Universal Cleated Backing
	Overall height: 3/8"

Available Sizes:

18" x 27"	3' x 12'	4' x 6'	6' x 8'
2' X 3'	3' x 16'	4' x 8'	6' x 12'
3' X 4'	3' x 20'	4' x 10'	6' x 16'
3' x 5'		4' x 12'	6' x 20'
3' x 8'		4' x 16'
3' x 10'		4' x 20'

Maintenance:

1. Vacuum Daily

When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.

2. Routine Maintenance

Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.

3. Deep Cleaning

Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.

4. Floor Preparation

Prior to the mat being put back into service, Andersen recommends that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.