Home > Carpet-like > Miscellaneous > Work in Progress > Entrance_Runners >

Brush Step Mat

Alternative Views:

Price $3.82 - $5.88 per square foot
Price $3.82 for orders of $500 and up
Price $5.88 small orders (may include shipping)

Request Quote by:

	Calling us - +1 (310) 734-6036
	Emailing us - [email protected]

Commercial entance rug

TECHNICAL :

*Standard Sizes :	2 x 3	3 x 4	3 x 5	3 x 6	3 x 10	4 x 6	4 x 8
Weight :	6 lb	10 lb	11 lb	14 lb	21 lb	19 lb	23 lb
Custom Sizes :	Custom sizing is available in: 3, 4 or 6 foot widths up to 60 feet in length Shipping weight for custom sizing is 0.77 lbs a square foot (plus packaging) – Allow 1-3 weeks for delivery
Full Rolls:	3 x 60 feet = 139 lbs, 4 x 60 feet = 185 lbs, 6 x 60 feet = 278 lbs

* Standard Sizes are often pre-cut and in stock so would ship faster than custom sizes
For metric size and weight conversions scroll to the bottom of this page.

Mat thickness is 3/8” (.375 inches/9.525 millimeters)
19oz of needle punched yarn every 9 square feet
High/low Rib design runs with the length of the mat
Vinyl backing ensures no mat movement
Flat vinyl edges on all four side to complete the mats look
Weight is .77lbs a square foot
1 Year manufacturer warranty
Brown	Red Black	Charcoal	Hunter Green	Slate Blue

DESCRIPTION :

109 Brush Step Entrance Mats are lighter weight mats used for light to medium traffic areas. High/low rib design runs with the length of the mat making it easier for moisture and debris to collect below shoe level. It is 3/8” thick making a perfect mat for narrow low profile doorways. It is threaded with 19 ounces of needle punched yarn every nine square feet with flat vinyl borders to complete the mats look. Vinyl backing ensures the mat will not move. Brush Step is available in five color options sure to fit any décor. Standard sizes that ship the fastest are below – typical turnaround time for standard sizes is 1-2 weeks from the date of order. Custom sizes will need an additional week or two (no more than 4 weeks.)

109 Brush Step mats are a great choice for a standalone mat for your indoor entrance ways, lobbies, or any area where there is light to medium foot traffic. Rated one of the best in comparison to other competitors rib designs! All NoTrax products are easily maintained, some suggestions are below.

MAINTENANCE :

Vacuum daily in heavy traffic areas, for mild traffic every other day or as needed for great mat appearance. For a deeper clean use any neutral synthetic soap with warm water, for best results use 1/2 cup soap per gallon of warm water.) If needed; you can use a hand brush to get the more stubborn stains out but scrub lightly and in the direction of fiber. Be sure to rinse thoroughly with cool water – leaving it at a slight incline to be sure it dries entirely before using again. To treat an on the spot spill, absorb the liquid with a clean towel blotting it until most of the spill is absorbed. Oil/Grease stains; use a dry cleaning fluid method (NO water) in tiny amounts again blotting until stains are lifted. Manufacture will not be held responsible for any mats that were miss-handled during a cleaning process.

TESTING :

109 Brush Step Entrance Mats (NoTrax products) have been independently tested in the following conditions yielding positive results.
• Accelerated Wear: an action of rollers with a specified load. Every sample was rotated ten degrees after every pass. Measured by thickness loss which testing resulted in a 38.66% loss.
• Water Retention: Sample piece was submerged for five minutes in water, removed - drained for fifteen seconds and weighed. Measured in/for weight gain (gallons per square yard) with results of .25
• Abrasion Resistance (ASTM D3884-01): was done by rubbing two wheels across the surface in a controlled yet wear-away fashion. The results were measured by grams, which was a weight loss of 1.15 grams per test specimen.
• Flammability (ASTM D2859, CPSC FF 1-70) Measuring the mats response as an ignition source within a controlled environment. To pass, the un-charred area must be greater than one inch. Mat Results were 3.5 Inches; Note - Passes Federal Flammability Study (DOC FF 1-70.)
• Accelerated Soiling (ASTM D6540-00): for a predetermined length of time the test piece was subjected to an accelerated soiling process. The sample was vacuumed – rated – submitted to an extraction device and then rated again. Results were based on a visually inspection – vacuum rating of 4.0; 4.5 Rating after Extraction.

METRIC SIZE / WEIGHT CONVERSIONS:

Standard sizes:
Ship the fastest

2 X 3 ft

0.61x0.91 m

3 X 4 ft

0.91x1.22 m

3 X 5 ft

0.91x1.52 m

3 X 6 ft

0.91x1.83 m

3 X 10 ft

0.91x3.05 m

4 X 6 ft

1.22x1.83 m

4 X 8 ft

1.22x2.44 m

Weight:

2.10 kilograms

4.19 kilograms

5.24 kilograms

6.29 kilograms

10.48 kilograms

8.38 kilograms

11.18 kilograms

Custom Sizes:

Metric - 0.61, 1.22 and 1.83 meter widths and up to 18 meters in length. Shipping weight for custom sizing is 0.349266 kg a square meter (plus packaging) – Allow 1-3wks for delivery

Full Rolls:

Metric - 0.91 x 18 m = 63 kg, 1.22 x 18 m = 83 kg, 1.83 x 18 m = 126 kg

Manufacturer/Notrax part numbers:

109C0036BR 109C0036BU 109C0036CH 109C0036GN 109C0036RB 109C0048BR 109C0048BU 109C0048CH 109C0048GN 109C0048RB 109C0072BR 109C0072BU 109C0072CH 109C0072GN 109C0072RB 109S0023BR 109S0023BU 109S0023CH 109S0023GN 109S0023RB 109S0034BR 109S0034BU 109S0034CH 109S0034GN 109S0034RB 109S0035BR 109S0035BU 109S0035CH 109S0035GN 109S0035RB 109S0036BR 109S0036BU 109S0036CH 109S0036GN 109S0036RB 109S0046BR 109S0046BU 109S0046CH 109S0046GN 109S0046RB 109S0048BR 109S0048BU 109S0048CH 109S0048GN 109S0048RB 109S0310BR 109S0310BU 109S0310CH 109S0310GN 109S0310RB

Manufacturer: NoTrax a product of Superior Manufacturing

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Carpet-like > Miscellaneous > Work in Progress > Entrance_Runners
Carpet-like