Commercial foyer mat

168 Opus Entrance Mats are non directional and are recommended for any area where the foot traffic is random. Diamond non-directional pattern is built to withstand heavy foot traffic – while the densely tufted yarn holds moisture and debris within for later cleaning. High and Low diamond pattern is crush resistant to collect and hide debris below foot surface, all while keeping its color and structure. It is threaded with 32 ounces of densely tufted yarn every nine square feet with raised four sided borders not only to hold mock within but to complete the mats look. 168 Opus is available in five bright color options in a variety of sizes. Backing is made of a rubber cleated sheet ensuring no mat movement.

168 Opus mats are a great choice for a standalone mat for your indoor entrance ways, lobbies, or any area where there is medium to high foot traffic; but if you are after an upscale drying/scrapping system; we as well as NoTrax suggest using 168 Opus mats with 167 Portrait and 166 Guzzler mats. All three styles where designed in the same colors but with different features to obtain the ultimate scrapping and drying abilities. All NoTrax products are easily maintained, suggestions are below.

168 Opus Entrance Mats(NoTrax products) have been independently tested in the following conditions yielding positive results.
• Water Retention: Sample piece was submerged for five minutes in water, removed - drained for fifteen seconds and weighed. Measured in/for weight gain (gallons per square yard) with results of .353.
• Abrasion Resistance (ASTM D3884-01): was done by rubbing two wheels across the surface in a controlled yet wear-away fashion. The results were measured by grams, which was a weight loss of 0.49 Grams (1.3%) per test specimen.
• Water Retention: Sample piece was submerged for five minutes in water, removed - drained for fifteen seconds and weighed. Measured in/for weight gain (gallons per square yard) with results of .455)
• Abrasion Resistance (ASTM D3884-01): was done by rubbing two wheels across the surface in a controlled yet wear-away fashion. The results were measured by grams, which was a weight loss of 0.6 Grams (1.9%) per test specimen.
• Flammability (ASTM D2859, CPSC FF 1-70) Measuring the mats response as an ignition source within a controlled environment. To pass, the un-charred area must be greater than one inch. Mat Results were 3.5 Inches; Note - Passes Federal Flammability Study (DOC FF 1-70.)